1181970L1
TOTAL ACCESS 3000 MODULES
Fan filter for 23" fan filter housing
1181940L1
Daughter board on Total Access 3000 backplane; 64k composite clock termination; Routes clock signals to access modules that need timing
1181971L1
Fan filter Housing for 23" heat baffle. Requires fan filter (p.n. 1181970L1)
1179018L1
1181004L1
Total Access 3000 Dual BNC I/O Module
1181113L1
1181113L9
1181050L1
Drops off DSX-1 signal from multiplexer; Performance monitoring support
1181050L1#SP
1181106L1
Total Access 3000 shelf mechanics. Full system integration for network management. Built-in protection switching.
1181106L1#N
The Total Access 3000 HTU-C can be deployed in circuits consisting of one HTU-C and one HTU-R. This version of the Total Access 3000 HTU-C supports single loop AIS. If loop 1 is down, loop 2 will continue to pass data (DSO's 13-24). If loop 2 is down, loop 1 will continue to pass data (DSO's 1-12). This HTU-C will operate properly only with the T400 HTU-R (P/N 1245024L1#N), which must be locally powered with -48Vdc.
1181111L1#C
Total Access H2TU-C
1181112L2
Total Access 3000 form factor
1181112L4
1181112L5
1181112L9
1181113L4
1181113L5
1181126L6
1181006L1
Mounted in the Total Access 3000 Heat Baffle; Uses fan filter for air purification; Dual power feeds for redundancy; NEBS Level 3 compliant
1181412L1
1181980L1
Fits in Total Access 3000/3010 chassis. Bantam jack access to eight 2-wire loops. Colored LED indicators
1181050L2
1181106L4
Total Access 3000 HDSL Transceiver Unit for the Central Office (HTU-C) is the CO unit used to deploy an HDSL T1 circuit using 4-wire metallic facilities.
1181106L5
1181310L2
Supports AMI and B8ZS line encoding. Provides 60 +/-3 mA of current with a constant-current, span-power supply, voltage provisionable for -130 V, +/- 130 V, and OFF. Incorporates DSX or MUX network interface. Supports in-band loopback code for both directions. Tolerates an extended temperature range (-40°C to +65°C). Complies with NEBS Level 3 standards. Functions as T1-OR or T1-NIU. Intrusive or Monitor Test Access
1181008L1
1181411L1
1181411L4
1181411L5
1181412L4
1181412L5
1181213L1
1181405L20
1181600L1
Spectrally friendly to existing services. Tolerant to noise, oxidized splice, and bridged taps. Automatically span-powers ALE-R (-185 Volts). Operates at symmetric rates between 128 kbps and 1.024 Mbps (ADSL and POTS). Provides "fail-to-POTS" mode for lifeline and installation support. Extends ADSL range by at least 50%. Provides metallic test signature to support remote verification of proper installation. Interoperates with most common DSLAMs.
1181402L1
Quad DSX-1 Access Module. Used only with the FR or ATM DS3 Multiplexers. Allows FR\ATM MUXs to connect to legacy TDM equipment via DSX-1 connections.
1181410L1
The Total Access 3000 Voice Cell Processor will map 24 independent voice VCs from the ATM Switching Module over the TA3000 TDM backplane to 24 corresponding DS0s in a single DSX-1 channel.
1181414L1
1181423L1
Quad shdsl Access Module. Multi-rate line code based on TC PAM modulation. Will operate with many CPE vendors.
1181450L1
Total Access 3000 DS3 ATM Line Module
1181405L2
1181407L1
Octal IDSL Access Module. Used only with the FR or ATM DS3 Multiplexers. Uses standard U-interface chipset - allows unit to work with standard UBRITES.
1181405L1
Octal ADSL Access Module. Used only with the FR or ATM DS3 Multiplexers. Supports full rate DMT (8 Meg) or G.LITE.
1181406L1
Octal 2B1Q Access Module. Used only with the FR or ATM DS3 Multiplexers. Uses Conexent chipset. Compatible with numberous CPE - ADTRAN, Flowpoint, Netopia
1181403L1
Octal shdsl Access Module. Multi-rate line code based on TC PAM modulation. Will operate with many CPE vendors.
4181405L2
1181420L1
Total Access 3000 Circuit Emulation Module
1181409L1
Complies with ATM Forum IMA Spec Version 1.1, AF-PHY-0086.001 for up to eight DS1 links. Performs Inverse Multiplexing over ATM (IMA) for up to eight DS1 links. Delivers a variety of high-speed services. VT 100 terminal menu interface for configuration, provisioning, status, test, and performance monitoring. Supports from one to eight DS1 interfaces in a single IMA group. Supports maximum of 100 ms differential link delay. Functions as network or subscriber side ATM IMA connection in conjunction with DS3 ATM Cell Switch Module. Provides the upstream connection to a network ATM switch. Provides downstream link to other subtended DSLAM systems. Combines NxDS1 links into a single high-speed link to the DS3 ATM Cell Switch Module (CSM). Continues operating (at a reduced rate) when a DS1 link failure occurs and automatically restores when failure clears.
1181200L1
Up to 10 BRIs multiplexed in a dual-slot card; Up to 140 BRIs supported in a single chassis; Fully compatible with ADTRAN's standalone BR1\10; Same card also supports 8 BRI multiplexing mode; Single chassis extends ISDN service to up to 14 sites
1181308L1
Home | Products | Order Forms | Support | Company Terms of Sale | Privacy Policy | Contact Us | Our Partners | Search An Industrial Partner 1999-2002. All rights reserved.
